Philips HTS5540/98 Service Manual Download Page 3

Page: 3 / 27

2 - 1

Software upgrade & Procedure to restore product setting

a) Copy the latest upgrading software onto a CD-R or USB storage

device

b) Insert the CD-R program disc or connect the USB storage device

to the home theater

c) TV will show message as follow

d) Select <OK>,the home theater will start to upgrading
automatically

Note: when upgrade in progress, please do not unplug or switch off
the device.
when the updated is complete ,the home theater automatically
switch to standby.

7) Produce to change Tuner grid

Only applicable for certain regions, in some countries, the

frequency step between adjancent channels in the FM hand is

50KHZ(100KHZ in some areas)

a) Press<radio> on R/C to select “FM”

b) In “FM” playbak mode,press & hold< play/pause> button until

“grid 9” or “grid 10” appears

Note: repeaing the same action will toggle back to it previous

tunning grid setting.

* “grid 10” is default for /93/94/51 version.

Upgrade fi le detected
Do you wish to continue with
the software upgrade?

OK Cancel

1)Restore factory setting

a) Press <SETUP> button on R/C

b) Select <preference setup> ,then press < OK >

c) Select <default>,then press <OK> to confi rm

2)Stroke version setting

a) Open the Door,then,press “1” “5” “9” on RC

b) Press <OK> button on RC

c) TV will show message as follow:

3)Password change

a) Press <SETUP> button on R/C

b) Select <preference setup> ,then press <OK>

c) Select <password> <change>,then press <OK> to confi rm

“0000” is default password supplied.

4)Trade model

a) Press <Open/Close>button on R/C

b) Press “2” “5” “9” on R/C,VFD will display “TRA ON “ or “TRA

OFF“

5)Check on software version

a) Press <SETUP> button on R/C

b) Select <preference setup> ,then press <OK>

c) Select <version info>,then press <OK>

d) TV will show message as follow:

Current model: 5540-93
Version:00.08.00_0 Release:2009.12.22
Region:2 Servo:AE.57.F1.00
8032: 05.00.04.06 Risc: AA.00.00.00
MCU: 07.00 Touch: 0009
TX: Error RX: Error
if current model does not match you set,
use down arrow key on the remote to change
OK

Preference setup

Version Info.

Current model: 5540-93
Version :00.08.00_0 Release: 2009.12.22
Region: 2 Servo: AE .57.F1.00
8032:05.00.04.06 Resc:   AA.00.00.00
MCU: 07.00   Touch: 0009
TX: Error RX: Error
OK

Press SETUP to exit menu

8) How to replace the defective DVD loader module

a) Remove the defective DVD loader module.

b) Connect DVD loader to “CN801”, “CN802”, “CN803” on the top of

main board as shown below.

c) Remove solder joint on the ESD protection points.

Note: if the DVD loader is ok, must solder the ESD protection points

on the top of DVD loader board before remove the connect “CN801”

“CN802” “CN803” on the top of main board cable, lest should
damage the DVD loader.

CAUTION!

This information is confi dential and may not be
distributed.Only a qualifi ed service person should
reprogram the Region Code.

The ESD protection points on
the top of DVD loader board

CN801