Philips HTS5100B/F7, Service Manual

Page: 12 / 72

1-6-1 E1P00INT
HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
To put the program back at the factory-default,
initialize the HTiB as the following procedure.
Method 1
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press the [Source] button one time on the front
panel.
4. Display the “AUX” on the VFD in the front panel.
5. Press the [Play] button for 5 seconds on the front
panel.
6. Display the “RESET” on the VFD in the front
panel.
7. State is Standby Mode, press the [Power] button to
the Red LED.
Method 2 : OSD
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [Home] Key in the remote control unit,
display “Home” on the VFD.
4. Select the Factory Default
→
Settings
→
Yes.
5. Press the [OK] key in the remote control unit.
6. Display the “RESET” on the VFD in the front
panel.
7. State is Standby Mode, press the [Power] button to
the Red LED.