background image

1-6-1

E1S00/2INT

HOW TO INITIALIZE THE BLU-RAY DISC HOME THEATER

[HTS3251B/F7]

To put the program back at the factory-default, 
initialize the BD player as the following procedure.

Note:

By initializing, network is reset to disconnected 
state and “Network Service Disclaimer” 
appears on the screen.

1. Turn the power on. 

2. Remove the disc on the tray and close the tray.

3. Press [1], [2], [3], [4], and [INFO] buttons on the 

remote control unit in that order. 
Fig. a appears on the screen. All VFD lights.

Fig. a

4. Press [ 

C

 ] button on the remote control unit. 

Fig. b appears on the screen and Fig. c appears 
on the VFD.

Fig. b

Fig. c

5. To exit this mode, press [

] button.

[HTS3051B/F7]

To put the program back at the factory-default, 
initialize the BD player as the following procedure.

1. Turn the power on. 

2. Remove the disc on the tray and close the tray.

3. Press [1], [2], [3], [4], and [INFO] buttons on the 

remote control unit in that order. 
Fig. a appears on the screen. All VFD lights.

Fig. a

4. Press [ 

C

 ] button on the remote control unit. 

Fig. b appears on the screen and Fig. c appears 
on the VFD.

Fig. b

Fig. c

5. To exit this mode, press [

] button.

"*******" differ depending on the models.

F/W Name
Version
Region
Pickup
ESN
DRM

Version Info

: *******
: *.***
: *-*
: **
: ***********************************
: OK

EXIT <POWER>

EEPROM CLEAR <STOP>

"*******" differ depending on the models.

F/W Name
Version
Region
Pickup
ESN
DRM

Version Info

: *******
: *.***
: *-*
: **
: ***********************************
: OK

EXIT <POWER>

EEPROM CLEAR <STOP>

EEPROM CLEAR : OK

"*******" differ depending on the models.

F/W Name
Version
Region
Pickup

Version Info

: *******
: *.***
: *-*
: **

EXIT <POWER>

EEPROM CLEAR <STOP>

"*******" differ depending on the models.

F/W Name
Version
Region
Pickup

Version Info

: *******
: *.***
: *-*
: **

EXIT <POWER>

EEPROM CLEAR <STOP>

EEPROM CLEAR : OK

Summary of Contents for HTS3051B/F7



























































Reviews: