18
EN
Main unit
•
Power supply:
•
Europe/China/Russia/India: 220-240V~,
50 Hz
•
Latin America/Asia Paci
fi
c: 110-240V~,
50-60 Hz
•
Power consumption: 55 W
•
Standby power consumption:
≤
0.9 W
•
Dimensions (WxHxD): 360 x 58 x 325 mm
•
Weight: 2.35 kg
Subwoofer
•
Output power: 50 W RMS (30% THD)
•
Impedance: 8 ohm
•
Speaker drivers: 133 mm (5.25") woofer
•
Dimensions (WxHxD): 160 x 267.5 x 265
mm
•
Weight: 2.61 kg
Speakers
Center speaker:
•
Output power: 50 W RMS (30% THD)
•
Speaker impedance: 4 ohm
•
Speaker drivers: 1 x 70 mm (2.75") woofer
•
Dimensions (WxHxD): 84.5 x 89 x 89 mm
•
Weight: 0.27 kg
Front/Rear speaker:
•
Output power: 4 x 50 W RMS (30% THD)
•
Speaker impedance: 4 ohm
•
Speaker drivers: 1 x 70 mm (2.75") woofer
•
Dimensions (WxHxD): 84.5 x 89 x 89 mm
•
Weight: 0.25-0.29 kg/each
Remote control batteries
•
2 x AAA-R03-1.5 V
Laser
•
Type: Semiconductor laser GaAIAs (CD)
•
Wave length: 645 - 665 nm (DVD), 770 - 800
nm (CD)
•
Output power: 6 mW (DVD), 7 mW (VCD/
CD)
•
Beam divergence: 60 degrees.
8 Troubleshooting
Warning
•
Risk of electric shock. Never remove the casing
of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, get support at www.philips.
com/support.
Main unit
The buttons on the home theater do not work.
•
Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Picture
No picture.
•
Make sure that the TV is switched to the
correct source for the home theater.
•
If this happens when you change the
TV system, press to open the disc
compartment, and then
439
on the remote
control to restore the default TV system.
•
If you have enabled the progressive scan
mode, press to open the disc compartment,
and then
297
on the remote control to
disable the progressive scan.
