Software Upgrade
Step1: Main board software Update procedure:
1.
Rename upgrade file to mpeg2160_XX.bin (XX means different area code).
Copy mpeg2160_XX.bin to root directly of USB disk.
2.
Plug USB in ,then Switch source to USB
It will be auto upgrade software and all LEDs will turn on while upgrading,
Strongly suggest do not operate it
when upgrading.
3.
The source will switch to AUX after upgrade successful.
Step 2: LED board software Update procedure:
1.
Rename upgrade file to mcu_2160.bin Copy mcu_2160.bin to root directory of USB disk.
2.
Plug USB in ,then switch source to USB
It will be auto upgrade software and all LEDs will turn on while upgrading,
Strongly suggest do not operate it when upgrading.
3.
All LEDs will blink two times after upgrade successful. Then machine will
reboot.
Warning: never copy mpeg2160_XX.bin and mcu_2160.bin to root directory of USB at the
same time.
4-1
Summary of Contents for HTL2160C/G/M/S/T/W/12/F7/93
