Philips HTB5540D/98, User Manual

Page: 21 / 46

19
EN
• [Slide animation] : Select animation for
the slide show.
• [Picture settings] : Select a predefined
color setting.
• [Repeat] : Repeat a selected folder.
Musical slideshow
If the picture and audio files are from the same
disc or USB storage device, you can create a
musical slideshow.
1
Select an audio track, and then press
OK
.
2
Press
BACK
, and go to the picture folder.
3
Select a picture, and then press ( Play ) to
start the slideshow.
4
Press to stop slideshow.
5
Press again to stop music.
Note
•
Make sure that the picture and audio formats are
supported by your home theater (see 'File formats' on
page 31).
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
Note
•
AM and digital radio are not supported.
•
If no stereo signal is detected, you are prompted to
install the radio stations again.
1
Connect the FM antenna to the FM
ANTENNA
on your home theater.
• For the best reception, place the
antenna away from your TV or other
sources of radiation.
2
Press RADIO on the remote control to
switch to radio source.
»
If you have already installed the radio
stations, the last channel that you
listened to is played.
» If you have not installed any radio
stations, the message
AUTO
INSTALL...PRESS PLAY appears on
the display panel. Press (
Play
) to
install radio stations.
3
Use the remote control to listen or to
change radio stations.
Play buttons
Button Action
/
or
Alphanumeric
buttons
Select a preset radio station.
Navigation
buttons
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation
of radio stations.
BACK Press and hold to erase the
preset radio station.
OPTIONS
Manual:
1) Press OPTIONS .
2) Press / to select your
preset.
3) Press
OPTIONS
again to
store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
SUBTITLE Toggle between the stereo
and mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz.
1
Press RADIO on the remote control to
switch to radio source.