ENGLISH
Placing or removing razor from
charging stand:
C
◗
Always place razor in stand in an upright
position making sure charging contacts in
bottom of stand fit into recess in bottom
of razor.
C
◗
Always remove razor from stand by lifting
straight up. Do not tilt razor.
◗
Always unplug the charging stand from the
electrical outlet immediately after use, except
when razor is (re)charging.
◗
You can store the razor in the charging stand.
C
1
Connect the small plug into the charging
stand and put the power plug into any
100v to 240v AC outlet. Use only the
cord and charging stand provided.
2
Charging requires a full 8 hours. A fully
charged razor has a cordless shaving time
of up to 30 minutes.
12
ENGLISH
filling Razor Cartridge
◗
only use NIvEA FoR MEN Shaving
Conditioner to refill the shaving conditioner
cartridge. Any other lotion may cause damage
to your razor.
C
1
Remove the tab of the NIvEA FoR MEN
Shaving Conditioner bottle (Model HS800).
C
2
Turn the cap on the shaving conditioner
bottle clockwise.
The cap moves down and the shaving conditioner
nozzle appears.
3
Place the nozzle of the conditioner bottle
into the opening of the conditioner
cartridge on the back of the razor.
C
4
Move the bottle up and down
approximately 5 times to pump the
shaving conditioner into the cartridge
until you see that the shaving cartridge
is full. Do not fill the cartridge beyond
the visible part.
BE CAREFUL NOT TO OVERFILL SHAVING
CARTRIDGE.
5
Remove nozzle of the shaving conditioner
bottle from shaving conditioner cartridge
and turn the cap counterclockwise until
the nozzle is flush with the top of the
cap. Replace the tab on top of the shaving
conditioner bottle.
13
