5
- Select the required ironing temperature with
the temperature dial (fig. 5).
- After a few minutes, pilot light (C) will go out.
This indicates that the soleplate has reached
the set temperature.
• While the soleplate is heating up, condensation
(drops of water) may occur. Just let the
soleplate heat up a little longer.
- While steam-ironing keep the steam activator
(A) pressed-in (fig. 6).
It may take a few seconds before steam is
emitted from the soleplate.
• If the room temperature is higher than approx.
20 °C (68 °F), the steam will be almost
invisible.
Do not hold your hand close below the
soleplate to check the steam production.
Steaming in a vertical position
Hanging curtains and clothing (jackets, woman's
suits, coats) can be steamed by holding the iron
in a vertical position (fig. 7).
Dry-ironing
• For ironing without steam, do not press-in the
steam activator (fig. 8).
If you wish to dry-iron only, there need not be
any water in the water tank.
If this is the case do not press switch “On/Off”
I
, but only press switch “Ironing”
≥
Guarantee and service
For guarantee conditions and further information:
see the folder with your steam cleaner.
Table
Tabel with
ironing
instructions
Kind of
fabric
Temperature
dial
Steam
ironing
B
Synthetic
e.g. acetatet,
acryllic,
viscose,
polyamide,
polyester
Silk
MIN
A
A
1
A
A
A
–
C
Wool
A
2
A
D
Cotton
Linen
A
3
MAX
Z
Please note:
This article cannot be ironed!
