background image

  5 

 Clean the shaver after every use (see chapter 

‘Cleaning’). 

  6 

 Put the protection cap on the shaver to prevent 

damage to the shaving heads (Fig. 8).

Note: Make sure that the lug of the protection cap covers the 
release button.

Cleaning

Never use scouring pads, abrasive cleaning agents or 
aggressive liquids such as petrol or acetone to clean the 
appliance. 

Be careful with hot water. Always check if the water is not 
too hot, to avoid burning your hands.

Regular cleaning guarantees better shaving performance.
The easiest and most hygienic way to clean the appliance 
is to rinse the shaving unit and the hair chamber with hot 
water every time you have used the appliance.

After every use: shaving unit and hair chamber

  1 

 Switch off the shaver, remove the adapter from the 

wall socket and pull the appliance plug out of the 
shaver.

  2 

 Rinse the outside of the shaving unit under a hot tap 

for some time (Fig. 9).

  3 

 Press the release button (1) and pull the shaving 

unit in a straight upward movement off the shaver 
(2).  (Fig. 10)

  4 

 Rinse the inside of the shaving unit under a hot tap 

for some time (Fig. 11).

  5 

 Rinse the hair chamber under a hot tap for some 

time (Fig. 12).

  6 

 Put the shaving unit back onto the shaver (Fig. 13).

Every two months: shaving heads

Note: Do not use cleaning agents or alcohol to clean the 
shaving heads. Only use HQ110 Shaving Head 

Cleaning 

Spray. 

EnglisH

EnglisH

19

20

Summary of Contents for HQ912





















Reviews: