Crimps
Crimping/straightening attachment ( ) with
curved surfaces ( ) facing towards each
other
Straight sleek style
and flicks
Crimping/straightening attachment ( ) with
flat surfaces(
) facing towards each other
Before you style your hair:
1
Ensure arrow on the ring is pointing at unlock icon on the handle
( ).
2
Slide a suitable attachment onto the metal tube ( ) of the handle
( ) and turn the ring to the right/anti-clockwise to lock it ( ).
•
To remove the attachment, turn the ring to the left/clockwise to
unlock ( ) and pull it off.
3
Connect the plug to a power supply socket.
4
Slide the on/off switch ( ) to
I
to switch on the appliance.
»
The power-on indicator ( ) lights up and starts blinking.
»
When the appliance is ready for use, the indicator stops blinking.
5
Place the appliance with the support ( ) on a heat-resistant
surface.
6
Comb your hair and divide your hair into small sections that are not
wider than 2-4cm.
Create curls or ringlets (Fig.4)
1
Select small curling attachment ( ) for styling tight curls and
ringlets.
2
Press the lever ( ) to open the clip ( ) and place a section of
hair between the clip and barrel ( ).
•
If you use the Slip-on spiral attachment ( ) to create ringlets,
wind the section of hair round the barrel following the spiral
profile. (Fig.6)
3
Release the lever and slide the barrel to the hair tip.
