Create waves (Fig.5)
1
Select the small curling attachment ( ). Then slide the Slide-on
brush ( ) onto barrel.
2
Wind a section of hair round the brush.
3
Hold the barrel in the position for max.10 seconds. Then unwind the
section of hair to remove the Slide-on brush ( ) from your hair.
4
To style the rest of your hair, repeat steps 2-3.
Create crimps (Fig.6)
1
Select crimping/straightening attachment (
).Make sure that the
curved surfaces ( ) are facing each other.
•
To remove the the crimping/straightening plates, grab each
protruded side of the plate ( ) and pull it off.
2
Press the lever ( ) to open the attachment and place a section of
hair between the crimping plates.
3
Release the lever and keep the plates together for 5 to 10 seconds.
4
Press the lever to open the plates and place the next section of hair
between the plates. Make sure there is an overlap.
5
Repeat this process until you have reached the hair tip.
6
To style the rest of your hair, repeat steps 2 to 5.
Create straight sleek style and flicks (Fig.7)
1
Make sure that the flat surfaces (
) are facing each other. Press
the lever ( ) to open the attachment and place a section of hair
between the straightening plates.
2
Slide down slowly the length of the hair in a single motion from root
to end, without stopping to prevent overheating.
•
To create your desired type of flick, turn the styler half-circle
inwards (or outwards) when it reaches the last 3-5 cm of the hair
tip. Hold in that position for 2 to 3 seconds, and then release it.
3
To style the rest of your hair, repeat steps 1 to 2.
