•
To remove the attachment, turn the ring to the left/clockwise to
unlock ( ) and pull it off.
3
Connect the plug to a power supply socket.
4
Slide the on/off switch ( ) to
I
to switch on the appliance.
»
The power-on indicator ( ) lights up.
5
Place the appliance with the support ( ) on a heat-resistant
surface.
6
Comb your hair and divide your hair into small sections that are not
wider than 2-4cm.
Create tight curls (Fig.4)
1
Select small curling attachment ( ) for styling tight curls.
2
Press the lever ( ) to open the clip ( ) and place a section of
hair between the clip and barrel ( ).
3
Release the lever and slide the barrel to the hair tip.
4
Hold the end of the cool tip ( ) and the handle ( ). Then wind
the section of hair round the barrel from end to root.
5
Hold the barrel in the position for max. 10 seconds. Then unwind the
section of hair until you can open the clip again with the lever.
6
To style the rest of your hair, repeat steps 2 to 5.
Create large curls or ringlets (Fig.4)
1
Select large curling attachment ( ) for styling large curls.
2
Press the lever ( ) to open the clip ( ) and place a section of
hair between the clip and barrel ( ).
•
If you use the Slip-on spiral attachment ( ) to create ringlets,
wind the section of hair round the barrel following the spiral
profile. (Fig.5)
3
Release the lever and slide the barrel to the hair tip.
4
Hold the end of the cool tip ( ) and the handle ( ). Then wind
the section of hair round the barrel from end to root.