Philips HP8383, Manual

Page: 10 / 22

Use the table below to select the right temperature setting
Hair type Temperature setting
Coarse, curly, hard-to-straighten High
Fine, medium-textured or softly waved Mid
Pale, blonde, bleached or colour-treated Low
5 Place a hair strand that is not wider that 5cm evenly between the
covers and press the handles firmly together.
6 Slide the straightener down the length of the hair in a single motion
from root to end (max. 5 seconds), without stopping to prevent
overheating.
Repeat this until you have straightened all your hair.
Note: The straightener has an automatic shut-off function and switches off
automatically after 60 minutes.
Care Infusion Covers
- The Care Infusion Covers release conditioning ingredients during
straightening when attached.
- The decoration on the covers fades slowly to tell you when you have
to replace the covers. The speed of fading is influenced by the way you
use the straightener, as the covers are sensitive to the pressure applied
on the straightener during styling. Too much pressure can damage your
hair. If you apply too much pressure, the ‘empty’ indicator fades faster
than usual (see chapter ‘After use’, section ‘Replacing the covers’).
Too little pressure affects the styling performance of the appliance.
If you apply too little pressure, the ‘empty’ indicator does not fade,
even after multiple straightening sessions. Thus, the ‘empty’ indicator is
useful guide for you during straightening to apply the optimal pressure,
allowing you to achieve better performance while respecting your hair.
After use
Cleaning
1 Switch off the appliance and unplug it.
2 Place the appliance on a heat-resistant surface and let it cool down
completely.
3 Clean the appliance, plates and covers with a damp cloth.
4 Store the appliance in a safe and dry place or hang it from the
hanging loop. You can use the heat-resistant cap to keep the plates
and covers free of dust.
Removing the covers
- Do not remove the covers when they are still hot. Wait until the
straightener has cooled down before you remove the covers.
- Do not use metallic or sharp objects to remove the Care Infusion Covers.
- Slide the cover release buttons backwards to remove the covers.
ENGLISH
10