background image

7

  Slide the straightener down the length of the hair in a single 

72$  +
prevent overheating.

9 ;5   1 +  
(or outwards) when it reaches the hair ends. Hold the straightener 
in that position for 2 to 3 seconds, and then release it.

8

  After 20 seconds, repeat step 6 until you achieve the desired look.

9

 9     2=

Note: 

The appliance is equipped with an auto-shut off function. 

After 60 minutes, the appliance switches off automatically. You 
can re-start the appliance by sliding the ON/OFF switch to 

 

and then to

again. 

After use

:

1

  Switch off the appliance and unplug it.

2

  Place it on a heat-resistant surface until it cools down.

3

  Clean the appliance and straightening plates by damp cloth.

4

  Lock the straightening plates ( ) by closing the arms and sliding 

the closing lock forwards. 

5

  Keep it in a safe and dry place, free of dust. You can also hang it 

with the hanging loop ( ).

 

If you need information e.g. about replacement of an attachment  
or if you have a problem, please visit the Philips website at  
www.philips.com/support or contact the Philips Customer Care 
Centre in your country. The phone number is in the worldwide 
 ; 4 4 4  
country, go to your local Philips dealer.

Summary of Contents for HP8333/00









Reviews: