Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Environment
Do not throw away the appliance with the normal household
waste at the end of its life, but hand it in at an official collection
point for recycling. By doing this, you help to preserve the
environment.
2
SPA Technology
Soft Protective Airflow
is designed to provide efficient and comfortable
scalp and hair drying. It helps to create an optimal balance between
evenly distributed heat and softened airflow. SPA technology with
1600W
power, dries faster,* wider** in a gentle way in which ensures
thorough drying result with less discomfort and hot spot on scalp or
hair.
*
Compared to predecessor Philips dryer HP4940
**
Compared to Philips 1600W dryer without SPA technology
3
Dry your hair
1
Select the nozzle (
c
)and attach it to the hairdryer (
a
) properly
before using (
E
, in Fig.3 ). The nozzle enables you to direct the
airflow straight at the brush or comb with which you are styling your
hair (
F
in Fig.3 ).
2
Connect the plug to a power supply socket.
3
Adjust the airflow switch and temperature switch(
b
) according to
your preference.
Switch
Settings
Function
Airflow
Strong airflow and fast drying
Gentle airflow and styling
Switch off
Temperature
Hot
Dry shower-wet hair quickly
Gently dry the hair at a constant
caring temperature
Cool
Cool airflow for stying your hair
»
When the appliance is powered on, ions are automatically and
continuously dispensed, reducing frizz and providing additional
shine. A special odor may be smelt. It is normal and caused by the
ions which are generated.
After use:
1
Switch off the appliance and unplug it.
2
Place it on a heat-resistant surface until it cools down.
3
To disconnect the attachment, pull it off the hairdryer.
4
Clean the appliance by damp cloth.
5
Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop (
d
).
A
C
B
D
1
2
A
3
F
E
a
b
c
d
4
Guarantee and service
If you need information e.g. about replacement of an attachment or if
you have a problem, please visit the Philips website at
www.philips.com/welcome or contact the Philips Consumer Care
Center in your country.The phone number is in the worldwide
guarantee leaflet. If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
5 Troubleshooting
Problem
Cause
Solution
The
appliance
does not
work at all.
The power socket
to which the
appliance has
been connected
may be broken.
Check the appliance is plugged in
correctly.
Check the fuse for this power
socket in your home.
The appliance
may have
overheated and
switched itself off.
Unplug the appliance and let it cool
down for a few minutes. Before you
switch on the appliance again, check
the grilles to make sure they are
not blocked by fluff, hair, etc.
The appliance
may not be
suitable for the
voltage to which
it has been
connected.
Ensure that the voltage indicated
on the type plate of the appliance
corresponds to the local power
voltage.