Philips HP6444/01, User Manual

Page: 8 / 70

ENGLISH
8
0 = off
I = normal speed
II = high speed
G
Inlet socket for appliance plug
H
Appliance plug
I
Cord
J
Adapter
K
Brush
L
Exfoliating head
Using the appliance
◗
Make sure your skin is clean, entirely dry and free from grease.
Do not use any cream before you start epilating.
1 Put the adapter (J) in the wall socket.
2 Insert the appliance plug (H) into the inlet socket (G) (Fig. 2).
3 Remove the protective cover (A) (Fig. 3).
4 Switch the appliance on by sliding the on/off switch (F) to the
desired speed setting:
◗
Select speed I (Fig. 4) for areas with little hair growth and for
areas where bones are located directly beneath the skin, such as
knees and ankles.
◗
Select speed II (Fig. 5) for larger areas with stronger hair growth.
5 Stretch the skin with your free hand to make the hairs stand
upright (Fig. 6).
6 Place the epilating head (D) perpendicularly onto the skin so that
the epilating head (D) and the pain softener (E) are in proper
contact with the skin.
7 Move the appliance slowly, with the pain softener (E) pointing
forward, against the direction of hair growth. Do not exert any
pressure (Fig.7).
8 Stretch your leg when you are epilating the back of your knee.