Philips HP6407/00, User Manual

Page: 9 / 64

4 Remove loose hairs with the cleaning brush (Fig. 13).
5 Rinse the epilating head under the tap for 5-10 seconds while
turning it (Fig. 14).
Shake the epilating head firmly and dry it thoroughly with a tea
towel (Fig. 15).
Note: Make sure the epilating head is completely dry before you place it
back onto the appliance.
Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 16).
guarantee & service
If you need information or if you have a problem, please visit the Philips
website at
www.philips.com
or contact the Philips Customer Care
Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country,
go to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
Troubleshooting
If the appliance does not work or does not work properly, first check the
list below. If the problem is not mentioned in this list, the appliance
probably has a defect. In that case we advise you to take the appliance to
your dealer or to an authorised Philips service centre.
Problem Cause Solution
Poor
epilating
results.
You move the
epilator in the
wrong direction.
Move the appliance against the
direction of hair growth, with the on/
off slide pointing in the direction in
which you move the appliance.
-
English