Philips HP6317/52, User Manual

Page: 8 / 86

2 To trim the bikini zone, place the comb attachment on the
shaving head with the recess of the attachment on the front of
the appliance (fig. 11).
3 To trim the underarms, place the comb attachment on the
shaving head with the recess of the attachment on the back of
the appliance (fig. 12).
4 Switch the ladyshave on.
5 Move the appliance against the direction of hair growth.
◗
Make sure the surface of the comb always stays in contact with
the skin (fig. 13).
Shaping
1 Remove the comb attachment to shape precise lines and
contours, e.g. in the bikini zone (fig. 14).
2 Lock the long hair trimmer by setting the trim/shave slide to the
'trim' position (fig. 10).
Cleaning and maintenance
After every use
Clean the ladyshave every time you have used it.
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
1 Switch the ladyshave off.
2 Remove the shaving foil (fig. 15).
Do not exert any pressure on the shaving foil to avoid damage.
3 Gently shake the shaving foil to remove hairs or clean it with the
brush supplied.
4 Remove the cutter block (fig. 16).
5 Clean the hair chamber with the brush supplied (fig. 17).
ENGLISH
8