■
Before using, check foil
for wear or damage. If
foil shows signs of wear
or damage, do not use
shaver as injury may
occur. Do not use until
foil has been replaced.
■
For wet shaving, you
may wish to prepare
your skin with soap or
shaving cream before
shaving.
■
For dry shaving, be cer-
tain that your skin is
clean. If you have sensi-
tive skin, you may wish
to apply talcum powder
before and/or after
shaving.
■
When shaving your
legs, underarms or biki-
ni line, it is not neces-
sary to press hard to get
a close shave. Pressing
too hard may cause skin
irritation, and razor will
not function properly.
In addition, do not use
deodorant or alcohol
based lotions immedi-
ately before or after
shaving. You may, how-
ever, want to use talcum
powder.
■
Clean Razor regularly
following
MAINTEN-
ANCE
instructions.
■
Razor only can be sub-
merged in water.
However, do not sub-
merge for extended
periods of time.
■
You may wish to store
Razor in its Charging
Base (with base con-
nected to electrical out-
let), so that Razor is kept
fully charged. However,
remember to allow bat-
tery to totally deplete
charge every 4 weeks
(see
TO CHARGE/
RECHARGE
).
■
For assistance or the
Authorized Norelco Serv-
ice Location nearest you,
call toll free:
1. BEFORE USING YOUR NEW PHILIPS RAZOR
1-800-243-7884
2. TO CHARGE/RECHARGE
■
This razor is for cord-
less shaving only.
■
Charging and recharg-
ing your Razor requires
a full 8 hours.
■
Charge Razor only in
Charging Base provided.
■
Be certain hands and
Razor are dry before
charging.
■
Recharge at tempera-
tures between 40°F and
95°F. Charging at lower
or higher temperatures
adversely affects life-
time of battery.
1. Be certain Razor is in
Off position.
2. Plug Charging Base
directly into 120V AC
electrical outlet.
3. Place Razor in Charging
Base (Fig. 1).
4. Recharge Indicator
Light on Charging Base
will light to indicate
Razor is (re)charging.
5. Charging requires 8
hours.
6. Razor may be continu-
ously charged in its
base (with base con-
nected to electrical out-
let) for a maximum of 4
weeks. At the end of 4
weeks, you
must
allow
the battery to totally
deplete their charge
before recharging.
■
To deplete charge,
shave in usual manner;
however, do not re-
charge Razor between
shaves. Continue to use
Razor until battery is
totally depleted.
7. You may then keep
Razor continuously
charging for another 4
week period before you
must once again allow
Razor to totally deplete
charge.
IMPORTANT:
Before
placing Razor in stand, be
certain Razor is in Off posi-
tion. With Razor in the base,
the recharge light will light
with Razor in either the On
or Off position, however,
your Razor will only
recharge if Razor is turned
Off (Fig. 1).
1. Prepare legs for wet or
dry shaving (see
BE-
FORE USING YOUR
N E W P H I L I P S
RAZOR
).
2. Turn Razor On (Fig. 2).
3. Hold Razor so that
Shaving Head is in full
contact with your skin.
Shave with smooth,
3. SHAVING LEGS
7. FOR ASSISTANCE
2
3
1. Prepare underarms and
other sensitive areas
for wet or dry shav-
ing (see
BEFORE
USING YOUR NEW
PHILIPS RAZOR
).
2. Turn Razor On (Fig. 4).
3. Lift your arm until skin
under arm stretches
slightly.
■
For shaving other sensi-
tive areas, stretch skin
taut with your fingers.
4. Hold Razor so that
Shaving Head is in full
contact with the skin.
Shave with gentle
strokes, using light
pressure (Fig. 5).
■
Pressing too hard may
cause skin irritation,
and Razor will not func-
tion properly.
5. Do not use deodorant or
alcohol based lotions
immediately before or
after shaving. You may,
however, want to use
talcum powder.
6. Turn Razor Off.
4. SHAVING UNDERARMS
5
IMPORTANT
■
It is recommended that
you replace your shav-
ing foil once a year.
■
Switch Razor Off and
remove Charging Base
from electrical outlet
before cleaning.
■
Never clean, remove, or
replace Shaving Head
while motor is on.
■
Do not apply pressure
or touch Shaving Head
with hard objects as this
may dent or damage foil
or trimmers.
■
Check foil regularly.
■
If damage occurs, re-
place foil.
■
Never use a razor with a
damaged or broken foil.
■
For best shaving perfor-
mance, it is suggested
to lightly oil Shaving
Head regularly by
spreading a drop of
light sewing machine oil
over the foil and trim-
mers (Fig. 6). If this
does not improve the
performance of your
razor, it may be time to
change foil.
■
Never immerse Charging
Base in water or other
liquid. You may clean by
wiping with a damp
cloth.
5. MAINTENANCE/CLEANING INSTRUCTIONS
OIL
6
6. IMPORTANT
BATTERY DISPOSAL
INFORMATION
When discarding
your razor:
B. ONCE A MONTH-
CLEANING SHAVING
HEAD
IMPORTANT: DO NOT
apply pressure to Shaving
Foil.
1. To remove Foil Guard,
simultaneously press in
small buttons on both
sides of Razor on
Angled Shaving Head
while pulling head up
and out (Fig. 7). Rinse
under water to remove
hairs (Fig. 8).
■
Hold Shaving Foil by
plastic housing only -
Shaving Foil is very
delicate and should
not be handled. If foil
becomes worn or
damaged, replace it.
2. Remove Cutter Block as
shown (Fig. 9). Hairs
can be removed from
Cutter Block by using a
soft brush (included),
by lightly blowing out
hairs, or running under
water (Fig. 10).
NOTE:
Avoid using brush
on Cutter Block as this may
cause damage.
■
Body of Razor and
Shaving Head, including
Shaving Foil, may be
rinsed under running
water to remove hairs
(Fig. 11).
3. Be sure all parts are dry
before reassembling.
■
Do not use cloth or
towel to dry Shaving
Foil or Cutter Block;
allow to air dry.
4. Replace Cutter Block
and Shaving Foil by
gently pressing back
into position on Shaving
Head.
■
Hold Shaving Head by
plastic housing only.
NOTE:
Use cold or luke-
warm water. Never use
cleaners such as alcohol or
nail polish remover.
THIS PHILIPS RAZOR CON-
TAINS A NICKEL-CADMIUM
RECHARGEABLE BATTERY
WHICH MUST BE RECY-
CLED OR DISPOSED OF
PROPERLY.
Refer to enclosed instruction
sheet for directions on
removing rechargeable bat-
tery.
CAUTION:
■
Battery should be re-
moved only when razor
is to be discarded.
■
Remove Razor from
Charging Base and un-
plug Charging Base from
outlet before disman-
tling.
■
All servicing should be
performed by an Author-
ized Norelco Service
Location only.
Or visit our Website at
www.philipsonline.com.
Authorized Norelco Service
Location Information is avail-
able 24 hours a day, 7 days a
week.
A. AFTER EACH USE
After each use, Razor
should be quickly cleaned
by rinsing under running
water or dipping and shak-
ing gently in water.
IMPORTANT: DO NOT
keep Razor submerged in
water for a long period of
time.
steady strokes, against
the direction of hair
growth (Fig. 3).
■
Pressing too hard may
cause skin irritation.
■
Practice is best for opti-
mum results.
4. Turn Razor Off.
7
9
8
10
11
1
4
