Philips HP L2035, Service Manual

Page: 11 / 77

11
Go to cover page
HP L2035
Mechanical Instructions
Front view as shown
in Fig. 1.
To use the height adjustment
base in Fig. 2.
Fig. 1
Step 2 :
1.
on a soft area to
prevent it from getting
scratched, defaced, or
broken.
2.Remove the four screws
as shown in Fig. 5.
3.Remove the monitor
base from the monitor
as shown in Fig. 5.
Lay the front bezel
down
Step 1 :
Disconnect screw and push
up and down the the monitor
as shown in Fig. 3.
Step 3 :
Remove Front Bezel by "-" screw driver on click holes to dig the back
cover as shown in Fig. 7 .
Step 4 :
Remove front bezel as shown in Fig. 10.
Fig. 7
dig out here
Fig. 6
screw
screw
Fig. 8
Front Bezel==>
Fig. 9
After removing the base, turn the set over,then disconnect the 2 screws
Fig. 10
Plastic clip (left & right) can be released by "-" screw driver as shown in
Fig. 8 & 9 .
Fig. 2
Fig. 5
Fig. 4
Fig. 3
Fig. 4
Disconnect screw
4 SCREWs
Control
panel
==>
BASE