32
Sound
No sound.
Ensure that the audio cables are
•
connected and press the correct input
source (for example,
AUDIO SOURCE
,
USB
) to select the device you want to
play.
This Home Theater System does not
•
support DTS surround sound. Ensure that
the play source is not DTS audio stream.
No sound from TV program.
Connect an audio cable from the AUDIO
•
input on this Home Theater System to
the AUDIO output on your TV. Then
press
AUDIO SOURCE
repeatedly to
select the corresponding audio input
source.
No surround sound effect from the speakers.
Press
•
SURR
to select a correct surround
sound setting.
If the Home Theater System supports
•
DTS playback, press
AUDIO SYNC
to
select other audio track.
Ensure that the source you are playing is
•
recorded or broadcast in surround sound
(Dolby Digital etc.).
Play
DivX video
fi
les cannot be played.
Ensure that the DivX
fi
le is encoded
•
according to the ‘Home Theater Pro
fi
le’
with the DivX encoder.
Ensure that the DivX video
fi
le is
•
complete.
The aspect ratio of the screen is not aligned
with the TV display setting.
The aspect ratio is
fi
xed on the disc.
•
10 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of
•
the Home Theater System.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using the
Home Theater System, check the following
points before requesting service. If the problem
remains unsolved, register your Home Theater
System and get support at www.philips.com/
welcome.
If you contact Philips, you will be asked for the
model and serial number of your Home Theater
System. The model number and serial number
are on the back or bottom of your Home
Theater System. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this Home Theater System do
not work.
Disconnect this Home Theater System
•
from the power outlet for a few minutes,
then connect again.
Picture
No picture.
See TVs manual for correct video input
•
channel selection. Change the TV channel
until you see the DVD screen.
Press
•
DISC
.
If you have changed the
•
[TV Display]
setting, switch back to default mode: 1)
Press to open the disc compartment. 2)
Press . 3) Press
SUBTITLE
.
EN
1_hts3020-05_en.indd Sec1:32
1_hts3020-05_en.indd Sec1:32
1/13/2009 9:10:49 AM
1/13/2009 9:10:49 AM
