8.0 Cleaning
• Always unplug the appliance before you
remove the accessories or clean the motor
unit
• The appliance is easier to clean immediately
after use (Fig. 74)
• Remove the main plug from the wall socket
(Fig. 75)
• Do not immerse the motor unit in water
(Fig. 76)
• Clean the basic unit with damp cloth only
(Fig. 77)
• Do not use abrasive cleaning agents,
scourers, acetone, alcohol etc. to clean the
appliance (Fig. 78)
• Disassemble the other parts after each use
and wash them in soapy water (Fig. 79)
• Then rinse with clean water and dry
thoroughly (Fig. 80)
• The bowl, the lid of the bowl, the pusher
and the accessories (Except for the blender
jar) can also be cleaned in a dishwasher
• Clean the metal blade, the blade unit of the
blender and the inserts very carefully. Their
cutting edges are very sharp!
• Make sure that the cutting edges of the
blades and the inserts do not come into
contact with hard objects. This could cause
them to become blunt
• Remove the used parts from the motor
unit. Disassemble the appliance in the
following order: Remove pulp container,
remove pusher, remove the arm and
remove the lid (Fig. 81)
• Remove the juice collector together with
the sieve
• Clean sieve with the cleaning brush in
warm water with some washing-up liquid
and rinse them under the tap (Fig. 82)
• You can quickly and easily preclean jars
and Food Processor bowl using PULSE
position Simply add water and washing up
liquid to the dirty bowl or jar and secure lid
followed by Arm. Then turn speed knob to
PULSE Position and hold it until jar or bowl
is clean When you preclean bowl or jar
this way. make sure the blade or kneading
accessory is assembled