Philips Headgroom QC5562/15, Manual

Page: 21 / 32

Using the swivel head
- From its starting position of 0° (pointing
forwards), you can turn the swivel head 45° or
90° to the left or right. This enables you to adjust
the position of the cutting element to the part
of your head that you are clipping. This makes it
much easier to clip your own hair.
- To set the cutting element to the desired position,
turn the swivel head (‘click’).
Note: Always adjust the position of the cutting element
by turning the swivel head. Do not turn the swivel head
by holding the cutting element or the comb attachment.
Note: Do not turn the swivel head more than 90° to
the left or right.
- The swivel head allows you to hold and use the
appliance like a styling comb.
5 Push the on/off slide upwards to switch on the
appliance.
6 Move the clipper through the hair slowly.
7 Regularly remove cut hair from the comb
attachment.
If a lot of hair has accumulated in the comb
attachment, remove the comb attachment from
the appliance and blow and/or shake the hair out
of it. When you remove the comb attachment, the
selected setting does not change.
Tips
- We advise you to start clipping at the highest
setting of the comb attachment and to reduce
the setting gradually.
- To clip most effectively, move the appliance against
the hair growth direction.
45º
180º
90º
0º
45º
90º
– 3 mm
– 5
– 7
20
ENGLISH