22
EN
9 Troubleshooting
Issue
Potential solution
Overflow
happens
during cooking
A large amount of foam might form when cooking certain
ingredients and this could lead to overflow. To open the lid during
cooking could reduce the amount of foam and decrease the
chance of overflow. Make sure ingredients in the kettle do not
exceed the maximum level indicated on the product. Adding too
many ingredients will lead to overflow and should be avoided.
All LED is on
and all the
keys have
no response
other than
power key.
Kettle is not on the power base while cooking and you cannot
operate your kettle by using keys on the control panel at this
moment. When a program is running, if you lift the kettle from
its base and put it back within five minute, the selected program
will resume and the remaining cooking time will be completed. If
it takes longer than five minutes before kettle is put back on the
power base, then the previously selected program will be cancelled
and you would need to restart the program again.
The kettle
beeps four
times and
switches off
automatically.
The kettle activated the boil-dry protection. This kettle is equipped
with boil-dry protection. This device automatically switches off the
kettle if it is accidentally pressed on when there is no water or not
enough water in it. The kettle will switch off and power-on light will
go off. Let it cool down. The kettle is ready for use again.
I try to switch
on the
kettle, but it
switches off
automatically.
