Philips HD8844 User Manual Download Page 58

Page: 58 / 84

ENGLISH

een

After rinsing the brew group, insert it back into its seat until it locks

into place (see the “Weekly Cleaning of the Brew Group” chapter).
Insert the drip tray and the coff ee grounds drawer. Close the service
door.

Press the “

” button to select the pre-ground coff ee function without

adding any pre-ground coff ee into the compartment.

Press the “

” button to start the coff ee brewing cycle.

Repeat steps 14 to 15 twice. Make sure you discard the dispensed

water.

To clean the drip tray, place a “Coff ee Oil Remover” tablet inside and

fi ll it 2/3rds full with hot water. Let the cleaning solution take eff ect for
about 30 minutes, then rinse thoroughly.

Monthly Cleaning of the Coff ee Bean Hopper

Clean the coff ee bean hopper once a month when it is empty with a damp
cloth to remove coff ee oil. Then refi ll it with coff ee beans.

Wash the brew group thoroughly with fresh water.

Summary of Contents for HD8844





















































































Search results

Summary of Contents for HD8844

Reviews:

Related manuals for HD8844

Brands by name

Popular brands

Philips HD8844, User Manual

Search results

Summary of Contents for HD8844

Reviews:

Related manuals for HD8844

Brands by name

Popular brands