background image

• 11 •

Green

Green

Using Coff ee Beans

•  To brew coff ee, press and release:

 the 

” button to select the desired 

Aroma. 

 the 

” button for an espresso cof-

fee; 

 the 

” button for a long coff ee.

•  Then, the brewing cycle starts.

To brew 2 cups of coff ee, press 
the desired button twice. The 

machine manages the brewing cycle 
automatically.

•  Coffee brewing stops automatically 

when the pre-programmed level is 
reached; however, it is possible to in-
terrupt coff ee brewing by pressing the 
button initially pressed.

Using Pre-ground Coff ee

This function allows using 
pre-ground and decaffein-

ated coff ee.

Note: 

•  If no pre-ground coff ee is poured 

into the compartment, only water 
will be dispensed;

•  If the dose is excessive and 2 or 

more measuring scoops of coff ee 
are used, the machine will not 
brew the product. Also in this case, 
the machine will run an empty 
cycle and discharge any ground 
coffee into the coffee grounds 
drawer.

To brew coff ee:

•  Press and release the “

” button to 

select the pre-ground coff ee function.

•  Lift the pre-ground coffee compart-

ment cover.

•  Add only 1 scoop of pre-ground coff ee 

to the compartment. Use the measur-
ing scoop supplied with the machine to 
perform this operation. Then, close the 
cover.

Warning: Only add pre-ground 
coffee to the compartment. 

Only use ground coff ee for espresso 
machines and never coff ee beans or 
instant coff ee. Other substances and 
objects may cause severe damages to 
the machine. Such damages will not 
be covered by warranty.

Press and release:

 the 

” button for an espresso cof-

fee; 

  

the 

” button for a long coff ee.

•  Then, the brewing cycle starts. 

•  Coffee brewing stops automatically 

when the pre-programmed level is 
reached; however, it is possible to in-
terrupt coff ee brewing by pressing the 
button initially pressed. 

  After brewing the product, the coff ee 

beans confi guration of the machine is 
restored.

Repeat the steps described 
above to brew other coff ees.

Green

Summary of Contents for HD8838/01





































Reviews: