background image

• 5 •

English

Danger of Burns

Never direct the steam/hot water wand towards yourself or others: 

Danger of scalding!

 

Al-

ways use the handles or knobs provided.

Machine Location - Suitable Location for Operation and Maintenance

For best use, it is recommended to:
•  Choose a safe, level surface, where there will be no danger of overturning it or being inju-

red.

•  Choose a location that is suffi  ciently well-lit, clean and near an easily reachable socket.
•  Provide for a minimum distance from the sides of the machine as shown in the illustration.
•  During machine turning on/off , it is recommended to place an empty glass under the di-

spensing head.

Do not keep the machine at a temperature below 0°C (32°F). 
Frost may damage the machine. 
Do not use the coff ee machine outdoors. 
In order to prevent its housing from melting or being damaged, do not place the machine on 
very hot surfaces and close to open fl ames.

Storing the Machine - Cleaning

Before cleaning the machine, turn it off  by pressing the “STAND-BY”, button, and then switch 
the power button to “0”. Remove the plug from the socket. 
Wait for the machine to cool down. 
Never immerse the machine in water! 
It is strictly forbidden to tamper with the internal parts of the machine.
Water left in the tank for several days should not be consumed. Wash the tank and fi ll it with 
fresh drinking water.
If the machine will not be used for a long time, dispense water from the steam wand, and 
carefully clean the Pannarello (if supplied), then turn it off  and unplug it. 
Store it in a dry place, out of the reach of children. 
Keep it protected from dust and dirt.

Servicing / Maintenance

In case of failure, problems or a suspected fault resulting from the falling of the machine, im-
mediately remove the plug from the socket. 
Never attempt to operate a faulty machine. 
Servicing and repairs may only be carried out by authorized service centers. 
All liability for damages resulting from work not carried out by professionals is declined.

Fire Safety Precautions

In case of fi re, use carbon dioxide (CO

2

) extinguishers. Do not use water or dry powder extin-

guishers.

Summary of Contents for HD8833/16

























Reviews: