Philips HD8752/05 Operating Instructions Manual Download

Page: 38 / 48

ENGLISH

Orange

Functions

Coff ee Temperature
This function allows you to adjust the coff ee brewing temperature.

Timer (stand-by)
This function allows you to adjust the time the machine will go into stand-
by mode after the last brewing.

Contrast
This function allows you to adjust the contrast of the display to better view
the messages.

Water Hardness
This function allows you to adjust water hardness to better manage ma-
chine maintenance:
1 = very soft water
2 = soft water
3 = hard water
4 = very hard water

For more details please see the "Measuring Water Hardness" section.

"" Water Filter
This function allows you to manage the "" water fi lter.
For more details, see the section related to fi lter handling.

Descaling Cycle
This function allows you to run the descaling cycle.

Factory Settings
This function allows you to reset all factory values.

Programming Example

In this example, we want to explain how to programme the display con-
trast. Proceed in a similar manner to change the other functions.

The programming menu can only be accessed when the machine is in on.

Press the "

" button to access programming.

Summary of Contents for HD8752/05

















































Search results

Summary of Contents for HD8752/05

Reviews:

Related manuals for HD8752/05

Brands by name

Popular brands

Philips HD8752/05, Operating Instructions Manual

Search results

Summary of Contents for HD8752/05

Reviews:

Related manuals for HD8752/05

Brands by name

Popular brands