Philips HD6591, User Manual

Page: 11 / 56

-
When the heating-up process is finished, the machine starts brewing coffee (Fig. 30). After
brewing, the machine switches off automatically.
9 Remove the coffee pod after use by lifting the pod holder out of the machine and emptying it (Fig.
31).
Caution: Be careful when you do this, for there may still be some hot water/coffee on the coffee
pod(s).
Caution: Never put normal ground coffee or use torn pods in the machine, as this causes it to
become blocked.
Brewing two cups of pod coffee
1 To brew two cups of pod coffee,place the deeper 2-cup pod holder in the machine. Place two pods
in the 2-cup pod holder (Fig. 32).
2
Press the 2-cup button to brew coffee (Fig. 33).
-
The button starts flashing and the machine starts heating up (Fig. 34).
Note: If the 2-cup button and the CALC light start flashing alternately during heating up and
brewing (Fig. 35), you need to descale the machine (see 'Descaling the machine').
-
When the heating-up process is finished, the machine starts brewing coffee (Fig. 36). After
brewing, the machine switches off automatically.
3 Remove the coffee pods after use by lifting the pod holder out of the machine and emptying it (Fig.
31).
Brewing special coffees
1 To brew a special coffee, place a cappuccino pod, a hot chocolate pod or another special coffee
pod in the 2-cup pod holder.
2 Place a cup under the coffee spout.
3 Press the 1-cup button to brew your special coffee.
Cleaning the machine
Never immerse the machine in water or any other liquid.
Never clean the machine by flushing it with the lid open.
Cleaning the coffee machine
Warning: Always unplug the machine before you clean it.
1 Clean the outside of the machine with a moist cloth.
2 To prevent clogging, clean the pod holders regularly with hot water, some washing-up liquid and a
washing-up brush. If you have used the 2-cup pod holder to brew cappuccino or hot chocolate,
make sure to clean it thoroughly immediately after use to remove any milk residues.
Note: You can disassemble the pod holders for more thorough cleaning (Fig. 37).
3 Clean the collector ring, the pod holders, the drip tray, the water reservoir and the water reservoir
lid in hot water, if necessary with some washing-up liquid. All detachable parts except for the water
reservoir and the insulated jug can also be cleaned in the dishwasher (Fig. 38).
11
English