English
5
Automatic rechargeable system
The FM transmitter automatically recharges
the headphone’s built-in rechargeable
R03/AAA NiMH batteries. Just position the
headphone on the transmitter and contact.
The green LED lights up during charging.
Easy transmission
The FM headphone is able to receive signals
from the transmitter, even through barriers
such as doors, walls and windows.
Multiple headphones with one
transmitter
An additional number of headphones
and/or wireless speakers can be used with a
single transmitter if they:
- operate in the 864 MHz band
- can detect a 19 kHz pilot tone
Please consult the appliance’s electrical
specification sheets for confirmation on
compatibility.
Kit contents
This FM headphone system consists of the
following accessories:
1 x SBC HC8852 FM transmitter
1 x SBC HC8855 FM headphone
1 x SBC CS030/00 12Volt / 200mA AC/DC
adapter (for UK: SBC CS030/05 12 Volt/
200 mA AC/DC adapter)
2 x rechargeable batteries R03/AAA
(NiMH), 550 mAh
1 x 3.5 mm stereo plug to 2x RCA audio
cable (2 m)
1 x 3.5 mm plug to 6.3 mm stereo adapter
plug
Transmitter (figure 1)
1 Power indicator
– lights up when audio
signals are detected at the audio input.
2 Recharging indicator
– lights up when
headphone is replaced on the
FM transmitter. Completely flat batteries
will be fully charged after about 16 hours.
3 Recharging contact
– make sure you
align your headphone to this contact for
recharging.
4 DC power
– connect to the 12 Volt/200
mA AC/DC adapter
5 Line audio input
– alternative connection
to an audio source
6 3.5 mm stereo headphone audio
input
– connects your FM transmitter to
an audio source
IMPORTANT
Use only 1 of the audio inputs:
3.5 mm stereo headphone audio input
OR the line audio input!
Using both audio inputs at the same
time may damage your FM wireless
system or your audio source!
7 Channel switch
– select one of
3 channels for best reception. We advise
you to select channel 1 as a first option.
8 Controls plate
General information
Controls
XP SBC HC 8850/00-1 19-03-2002 14:45 Pagina 5
