Wrong battery orientation
Reposition the batteries according to
the engraved polarity symbol.
No power supply to transmitter
Make sure the docking station is
connected to the local mains power
supply through an adapter and follow
step 5 to 7.
Battery power running low
Follow steps 5 to 7 to recharge the
system.
Audio source not connected
Make sure the audio output of your
audio source is connected to the
3.5 mm STEREO INPUT JACK of
your transmitter. Follow step 9 to 12.
Audio source is off
Turn on your audio source.
Volume level set too low
Adjust the volume level of your
audio source or the headphone.
Hearing Safety: Continuous use at a
high volume may permanently damage
your hearing.
Audio output level low
In case of audio sources with
adjustable output level, adjust the
output level to a higher and
non-distorted level.
IMPORTANT: In case of certain TVs,
the headphone jack output level can
only be adjusted after accessing the TV
on-screen menu.
Headphone not tuned to
Push and hold the AUTO-TUNING
the transmitter
BUTTON for about 1 sec, then the
headphone will automatically search
for the best possible reception.
Interference from other
1) Alter the transmitter’s frequency
radio sources
channel. Select 1 of the 3 options for
best reception.We advise you to
select channel 1 as the first option.
Next adjust the headphone’s tuning
channel as described above.
2) Move transmitter or headphone
elsewhere
Receiver too far away from
Move closer for reception
transmitter
Transmitter other than
Make use of the SBC HC8562
SBC HC8562 is used
transmitter provided. Some
transmitters already built into other
equipment may not be compatible
with the SBC HC8565 headphone
because of the advanced
technologies used.
ENGLISH 9
HC8560.qxd 15-09-2004 10:01 Pagina 9
