15
14
W
INDOWS
® ME
AND
XP I
NSTALLATION
ATTENTION
The Windows ME and Windows XP operating systems automatically install
a default audio driver when the Harmonic Edge is first detected.
You must
install the Philips Harmonic Edge drivers from the installation CD for proper
audio card operation.
After the PSC602 has been installed power on the PC.
Windows ME and Windows XP will find the PSC602 and run the “Found
New Hardware Wizard”
(You will not be able to abort this process)
. At
the completion of the hardware installation process, insert the Philips Driver
Installation CD into your CD drive. In a few moments the Philips Auto
Install application will run. Click on the
Yes
button to begin the driver install
process.
If after a minute or two the panel above does not appear on your screen go
to D:\setup.exe on the Philips Driver Installation CD (D: Represents your
CD rom drive). Double click on
Setup.exe
, this will start the Philips driver
Install application.
When the driver install process begins click on the
Yes
button to continue.
Follow the on-screen instructions to complete the driver install process.
When installing PSC602 drivers on the
WinME Operating System
one of
the following panels will appear:
Driver Installation
PANEL 2
602_harmonic_usermanual_v14.qxd 10/9/01 5:45 PM Page 14
