6
7
4 Bluetooth connection
m
Warning
• These instructions
apply only when the
GoPure car air purifier is
connected the first time
or the Bluetooth on the
smartphone has been
reset to factory settings.
• You cannot set up two
air purifiers at the same
time. The only way to set
up multiple air purifiers is
to repeat the procedure
for each machine.
1. Scan the above QR
code to download
the “Air Matters” app.
2. Follow the guided
instructions to
connect PHILIPS Car
Air Purifier.
5
Using the GoPure car air purifier
1. Press the control button to switch between the three modes:
Silent, Auto and Boost.
3. When turned off, power on the purifier and it will start
running in Automatic mode.
The purifier will turn on automatically once the car engine is started. The
default mode is the one used before the last shutdown.
2. When turned on, press and hold the control button for
2 seconds to shut down the purifier.
Reminders:
1. The main unit’s AQI (Air Quality Indicator) shows a combination of PM2.5 and Gas
contamination levels. Air matters APP displays additional pollutants, PM1 and PM10.
2. Gas sensor can detect formaldehyde, toluene, VOC, cigarette smoke, ammonia etc.
3. Gas sensor initialization duration will be different according to different environment,
It may take 30 seconds to 3 minutes to display Gas level. Please do not turn off while waiting.
Understanding the GoPure Healthy Air Indicator
The Healthy Air Indicator will display your car’s air quality in real time.
Red
Red
>76 ug/m
3
36-75 ug/m
3
0-35 ug/m
3
L3
L2
L1
Severe pollution
Moderate pollution
High concentration level
Medium concentration level
Low concentration level
Yellow
Yellow
Blue
Blue
Excellent
2S
• Please ensure a
distance of less than
5 meters without any
obstacle between
the smartphone and
GoPure car air purifier.
It is recommended to
set up pairing in the car.
• “Air Matters” app
support above Andorid
5.0 and IOS 10.0 system,
older version system
may cause app function
failure. "Siri" function
support IOS12.0 and
above system.
