Philips GoGear SA4TP304, User Manual

Page: 10 / 38

8 EN
3 Get started
Charge power
TAP3.2
has a built-in battery that can be
charged through the USB connector of a
computer.
Connect
TAP3.2
to a PC by using the USB
cable.
Note
‡
When you connect TAP3.2 to a computer, you are
EULHÁ\SURPSWHGWRVHOHFW
[Charge & transfer] or
[Charge & play] . If no option is selected, [Charge &
transfer] applies.
‡
To play the TAP3.2 when you charge power, select
[Charge & play] .
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100% 75% 50% 25% 0%
»
$ÁDVKLQJEDWWHU\VFUHHQLQGLFDWHVWKDW
the battery is low. The player saves
all settings and switches off within 60
seconds.
Note
‡
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
‡
The charging animation stops and the icon is
displayed when the charging process is completed.
To conserve battery power and increase the
play time, do the following on TAP3.2:
‡
Set the backlight timer to a low value
(go to >
[Display settings] >
[Screen off timer] ).
Switch the player on or off
Press and hold until the player is switched on
or off.
Automatic standby and shut-down
The player has an automatic standby and shut-
down feature that can save battery power.
If in idle mode (no play, no button is pressed)
for a certain time duration, the player switches
off automatically.
7RGHÀQHWKHWLPHGXUDWLRQ
‡
From the Home screen, go to >
[Set power-saving mode…]
.