Philips GoGear SA4ACT02, User Manual

Page: 8 / 20

6 EN
g
,
‡
Press: increase/decrease the volume
‡
Press and hold: Press and hold the two
buttons together to switch
FullSound
on or off
h
‡
Press: Check the battery level
‡
Press and hold: Switch the workout
mode on or off; When the workout
mode is on, press the button to check
the workout time and calorie burnt.
Voice feedback
With the voice feedback, you can know the
status of the player.
Through Philips Songbird, you can select your
language options for the voice feedback (see
'Set up the player through Philips Songbird' on
page 13).
Check workout information
With the workout mode, you can check
your workout time and estimate your calorie
consumption. Before you use the workout
mode, set up the player (see 'Set up the player
through Philips Songbird' on page 13).
1
Press and hold to switch on the
workout mode.
2
Press .
»
You hear the voice feedback on your
current workout time and estimate of
calorie burnt.
3
Press and hold again to switch off the
workout mode.
»
You hear the voice feedback on your
total workout time and estimate of
calorie burnt.
Check battery level
‡
When the workout mode is off, press .
»
You hear the voice feedback on
battery level.
Water-resistance performance
The water-resistance performance of ACTION
meets the Ingress Protection Rating (IP Code)
IPX5 of IEC60529 (see 'Water-resistance
VSHFLÀFDWLRQVRI$&7,21RQSDJH
16).
You can use the player in the rain or after
perspiration.
Note
‡
The headphone sections are not water-resistant.
To wash the player,
‡
Make sure that you have closed the USB
cover properly.
‡
Keep the headphone sections from water.
‡
Rinse the player with fresh water or gently
running water at normal temperature.
‡
When you dry the player, keep from using
hair dryers.
‡
Use the player after it dries completely.