Problem
Possible cause
Solution
The iron is not hot
enough and/or the
drip-stop function
has been activated.
Set an ironing temperature that is
suitable for steam ironing (
2
to
MAX). Put the iron on its heel
and wait until the temperature
light has gone out before you
start ironing.
The iron
does not
produce a
steam
boost.
You have used the
steam boost
function too often
within a very short
period.
Continue ironing in horizontal
position and wait a while before
you use the steam boost function
again.
The iron is not hot
enough.
Set an ironing temperature at
which the steam boost function
can be used (
3
to MAX). Put
the iron on its heel and wait until
the temperature light has gone
out before you use the steam
boost function.
Water
droplets
drip onto
the fabric
during
ironing.
You have not closed
the cap of the filling
opening properly.
Press the cap until you hear a
click.
You have put an
additive in the
water tank.
Rinse the water tank and do not
put any additive in the water tank.
The set
temperature is too
low for steam
ironing.
Set a temperature of or
2
higher.
EnGlish
16
4239.000.6218.5.indd 16
23-10-09 10:08
Summary of Contents for GC4400 serie
