Philips GC097 User Manual Download Page 2

ENGLISH

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the 

support that Philips offers, register your product at 

www.philips.com/welcome

.

General description (Fig.1)

A  Temperature dial

B  Mains cord

C  Temperature light

D  Soleplate

Important

Read this important information carefully before you use the appliance and save it for 

future reference.

Danger

 

-

Never immerse the iron in water.

Warning

 

-

Check if the voltage indicated on the type plate corresponds to the local mains 

voltage before you connect the appliance.

 

-

Do not use the appliance if the plug, the mains cord or the appliance itself shows 

visible damage, or if the appliance has been dropped.

 

-

If the mains cord is damaged, you must have it replaced by Philips, a service centre 

authorised by Philips or similarly qualified persons in order to avoid a hazard.

 

-

Never leave the appliance unattended when it is connected to the mains.

 

-

This appliance can be used by children aged from 8 and above and persons 

with reduced physical, sensory or mental capabilities or lack of experience and 

knowledge if they have been given supervision or instruction concerning use of 

the appliance in a safe way and if they understand the hazards involved.

 

-

Cleaning and user maintenance shall not be made by children unless they are 

older than 8 and supervised.

 

-

Children should be supervised to ensure that they do not play with the appliance.

 

-

Keep the iron and its cord out of the reach of children less than 8 years of age 

when it is connected to the mains or cooling down.

 

-

Do not let the mains cord come into contact with the hot soleplate of the iron.

Caution

 

-

The soleplate of the iron can become extremely hot and may cause burns if touched.

 

-

Only connect the appliance to an earthed wall socket.

 

-

Check the mains cord regularly for possible damage.

 

-

Always place and use the iron on a stable, level and horizontal surface.

 

-

When you have finished ironing, when you clean the appliance and also when you 

leave the iron even for a short while: put the iron on its heel and remove the mains 

plug from the wall socket.

 

-

The appliance is intended for household use only.

Before first use

  1  

  Remove any sticker or protective foil from the soleplate and clean the soleplate with 

a soft cloth.

The iron may give off some smoke when you use it for the first time.This will cease after a 

short while.

Preparing for use
Setting the temperature

  1  

  Put the iron on its heel.

  2  

  Set the temperature dial to the required ironing temperature (fig. 2).

 

-

Check the laundry care label for the required ironing temperature:

 

-

If you do not know what kind or kinds of fabric the article is made of, determine 

the appropriate ironing temperature by ironing a spot that will not be visible when 

you wear or use the article. Start at a relatively low temperature and gradually 

increase the temperature until you obtain the required ironing result.

 

-

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent 

shiny patches.

 

-

Start ironing the articles that require the lowest ironing temperature, such as those 

made of synthetic fibres.

  3  

  Put the mains plug in an earthed wall socket (fig. 3).

The temperature light goes on.

Using the appliance

  1  

  Set the temperature dial to the recommended position.

See chapter ‘Preparing for use’.

 2 

  the temperature light goes on to indicate that the iron is heating up (fig. 4).

Start ironing when the temperature light has first gone out and then goes on again.
The temperature light will go on from time to time during ironing.

 

,

If you set the temperature dial to a lower setting after you have ironed at a 
high temperature, let the iron cool down for five minutes before you start ironing 
again.

Cleaning and maintenance

 1 

  Remove the mains plug from the wall socket and let the iron cool down.

 2 

  Wipe the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.

Keep the soleplate smooth: avoid hard contact with metal objects.

 3 

  Clean the upper part of the appliance with a damp cloth.

Storage

 1 

  Remove the mains plug from the wall socket (fig. 7).

 2 

  Wind the mains cord round the cord storage facility (fig. 8).

 3 

  Always store the iron standing on its heel in a safe and dry place (fig. 8).

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations 

regarding exposure to electromagnetic fields.

Environment

 

-

Do not throw away the appliance with the normal household waste at the end of 

its life, but hand it in at an official collection point for recycling. By doing this, you 

help to preserve the environment (Fig. 9).

Support

 If you need support or information, please visit the Philips website at  

www.philips.com/support

 

or read the worldwide guarantee leaflet.

Frequently asked questions

This chapter lists the questions most frequently asked about the appliance. If you 

can’t find the answer to you question, please contact the Customer Care Centre in 

your country.

Question

Answer

Why does the soleplate stay cold, even 

though I have plugged the iron in?

There may be a connection problem. 

Check the mains cord, the plug and the 

wall socket.
The temperature dial may be set to 

MIN. Set the temperature dial to the 

required ironing temperature (see 

section ‘Setting the temperature’).

ESPAÑOL

Introducción

Enhorabuena por su adquisición y bienvenido a Philips Para poder beneficiarse por 

completo de la asistencia que ofrece Philips, registre el producto en 

www.philips.

com/welcome.

Descripción general (fig. 1)

A  Control de temperatura

B  Cable de alimentación

C  Piloto de temperatura

D  Suela

Importante

Antes de usar el aparato, lea atentamente esta información importante y consérvela 

por si necesitara consultarla en el futuro.

Peligro

 

-

No sumerja nunca la plancha en agua.

Advertencia

 

-

Antes de enchufar el aparato, compruebe si el voltaje indicado en la placa de 

modelo se corresponde con el voltaje de red local.

 

-

No utilice el aparato si la clavija, el cable de alimentación o el propio aparato 

tienen daños visibles, o si el aparato se ha caído.

 

-

Si el cable de alimentación está dañado, deberá ser sustituido por Philips, por 

un centro de servicio autorizado por Philips o por personal cualificado, con el fin 

de evitar situaciones de peligro.

 

-

No deje nunca el aparato desatendido cuando esté enchufado a la toma de 

corriente.

 

-

Este aparato puede ser usado por niños a partir de 8 años y por personas con 

su capacidad física, psíquica o sensorial reducida y por quienes no tengan los 

conocimientos y la experiencia necesarios, si han sido supervisados o instruidos 

acerca del uso del aparato de forma segura y siempre que sepan los riesgos que 

conlleva su uso.

 

-

Los niños no deben llevar a cabo la limpieza ni el mantenimiento a menos que 

tengan más de 8 años o sean supervisados.

 

-

Vigile a los niños para asegurarse de que no jueguen con el aparato.

 

-

Mantenga la plancha y su cable fuera del alcance de los niños menores de 

8 años cuando esté conectada a la red eléctrica o se esté enfriando.

 

-

No permita que el cable de alimentación entre en contacto con la suela caliente 

de la plancha.

3

6

1

7

8

9

A

2

B

C

D

4

5

Reviews: