Philips FWV182, User Manual

Page: 19 / 25

19
MCV250/21-1
English
Radio Reception
Tuning to radio stations
1
Select
TUNER
source.
2
Press
BAND
(
TUNER
on the remote) to
select the desired waveband : FM or MW.
3
Turn the
TUNING
control knob to tune to a
desired radio frequency.
Tape Operation/Recording
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
Tape playback
1
Select TAPE source.
2
Open the tape key flap marked “
OPEN
2
” on
the front panel.
3
Press
STOP•OPEN
Ç
0
to open the tape
door.
MHz
CD FM
4
Insert a recorded tape and close the tape door.
●
Load the tape with the open side downward
and the full spool to the left.
5
Press PLAY
2
to start playback.
●
The key is automatically released at the end of a
tape, except if
PAUSE
;
has been activated.
6
To pause, press
PAUSE
;
. Press again to
resume.
7
By pressing
SEARCH
à
or
á
on the system
fast winding of tape is possible in both directions.
8
To stop the tape, press STOP•OPEN
Ç
0
.
Notes:
– The sound source cannot be changed while
playing or recording a tape.
– The system will change to the tape mode from
any other active mode as long as you press down
PLAY
2
.
pg001-pg025_FWV182_98-Eng 2006.1.4, 15:46 19