18
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press
SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated,
»
is
displayed.
2
Press
SLEEP
repeatedly until [OFF] (off)
is displayed.
When sleep timer is deactivated,
»
disappears on the display.
Listen to an external device
You can listen to an external audio device
through this unit.
For audio players with headphone sockets
1
Press
MP3 LINK
/
AUX
repeatedly to
select the MP3 link source.
2
Connect the supplied MP3 link cable to:
the
•
MP3 LINK
jack (3.5mm) on the
unit.
the headphone jack on an external
•
device.
3
Start to play the device (refer to the
device’s user manual).
For audio players with red/white audio output
sockets
1
Press
MP3 LINK
/
AUX
repeatedly to
select the AUX source.
2
Connect the audio cables (white/red
jacks, not supplied) to:
the
•
AUX IN
jacks on the back of the
unit.
the AUDIO OUT jacks on an
•
external device.
3
Start to play the device (refer to the
device’s user manual).
8 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc, radio or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly. (see ‘Set clock’ on page 13)
2
Press
POWER
to switch to standby
mode.
3
Press and hold
TIMER
for more than 2
seconds.
A prompt to select the source is
»
displayed.
4
Press
DISC 1/2/3
, or
TUN
or
USB
to
select a source.
5
Press
TIMER
to confirm.
The clock digits are displayed and
»
begin to blink.
6
Press
ALB//-
to set the hour.
7
Press / to set the minute.
8
Press
TIMER
to confirm.
The timer is set and activated.
»
To deactivate or re-activate an alarm timer
1
When the unit is turned on, press
TIMER
repeatedly.
If the timer is activated,
»
is displayed.
If the timer is deactivated,
»
disappears.
Note
In MP3 link mode, the alarm timer cannot be
•
set.
Tip
If disc/USB source is selected and the
•
audio cannot be played, tuner is activated
automatically.
EN
