17
English
Radio Reception
Tuning to radio stations
1
Press
TUNER
(or
TUN
on the remote control).
2
Hold
S
/
T
(or
à
/
á
on the remote
control) and then release the button.
➜
The system will start searching for a radio
station with sufficient signal strength.
3
Repeat step
2
if necessary until you find the
desired station.
●
To tune to a weak station, press
S
/
T
(or
à
/
á
on the remote control) briefly and
repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
1
Press
TUNER
(or
TUN
on the remote
control) to select TUNER mode.
2
Press and hold
PROG
until "
AUTO
" is displayed.
➜
PROG
starts flashing.
➜
AUTO
is displayed and available stations are
programmed in order of waveband reception
strength.
➜
When all the available radio stations are
stored or the memory for 40 presets are used,
the first preset radio station will be played.
MP3 LINK
To stop storing the automatic preset
●
Press
Ç
.
Manual programming
1
Tune to your desired station (refer to “Tuning to
radio stations”).
2
Press
PROG
to activate programming.
➜
PROG
flashes in the display.
3
Press
ALBUM//-
on the system (or
ALB//-
on the remote control) to
allocate a number from 1 to 40 to this station.
4
Press
PROG
again to confirm the setting.
➜
The preset number and the frequency of the
preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press
ALBUM//-
(or
ALB/
/-
on the remote control) until the
desired preset station is displayed.
pg001-023_FWM396_55_Eng 4/3/08,
15:35
17
