20
English
Tape Operation/Recording
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
Tape playback
1
Select
TAPE
source.
2
Open the tape key flap marked “
OPEN
2
” on
the front panel.
3
Press
STOP•OPEN
Ç
0
to open the tape
door.
4
Insert a recorded tape and close the tape door.
●
Load the tape with the open side downward and
the full spool to the left.
5
Press
PLAY
2
to star t playback.
●
The key is automatically released at the end of a
tape, except if
PAUSE
;
has been activated.
6
To pause, press
PAUSE
;
. Press again to resume.
7
By pressing
à
or
á
on the system fast winding
of tape is possible in both directions.
8
To stop the tape, press
STOP•OPEN
Ç
0
.
Note:
– The sound source cannot be changed while
playing or recording a tape.
pg001-027_M352_22_Eng
2005.12.23, 15:53
20
