13
EN
»
When sleep timer is deactivated,
disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The last
selected source is activated to play at a preset
time.
1
Ensure that you have set the clock
correctly.
2
Press and hold
TIMER
on the remote
control for more than 2 seconds.
»
The hour digits are displayed and begin
to blink.
3
Press / to set the hour.
4
Press
TIMER
to confirm.
»
The minute digits are displayed and
begin to blink.
5
Press / to set the minute.
6
Press
TIMER
to confirm.
»
The timer is set and activated.
To select a source to activate as the alarm
sound:
1
Press
DISC
,
TUN
,
AUX
or
MP3 LINK
to
select a source.
•
For DISC: ensure that there is a disc in
the disc compartment.
•
For TUNER: tune to a radio station.
•
For AUX/MP3 LINK: ensure that the
external device is connected and
turned on.
2
Press to switch the unit to standby.
Activate and deactivate alarm timer
1
Press
TIMER
repeatedly to activate or
deactivate timer.
»
If timer is activated, the display shows
.
»
If timer is deactivated, disappears on
the display.
9 Product
information
Note
•
Product information is subject to change without prior
notice.
General information
AC power
110 - 127V/220 - 240V,
50/60Hz
Dimensions
- Main Unit
(W x H x D)
- Speaker Box
(W x H x D)
220 X 312 X 248 mm
189 x 290 x 175 mm
Weight
- With Packing
- Main Unit
- Speaker Box
7.9 kg
3.4 kg
2 x 1.7 kg
Amplifier
Rated Output Power 2 X 25 W RMS
@ 30% THD
Frequency Response
63 - 16000 Hz, ±3dB
Signal to Noise Ratio > 62 dBA
Speakers
Speaker Impedance
4ohm
Disc
Laser Type
Semiconductor
