Philips FWD573, User Manual, Page: 12 / 48

12
English
Connections
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
●
Use the composite cable (yellow) to connect the
system’s
VIDEO
jack to the video input jack on
the RF modulator.
●
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s RF jack.
●
Deactivate Progressive Scan through SYSTEM
MENU . See “Using the Setup Menu- Using
Progressive Scan to improve image quality”.
Using S-Video In jack
●
Use the S-Video cable (not supplied) to connect
the system’s
S-VIDEO
jack to the S-Video
input jack (or labeled as Y/C or S-VHS) on the
TV set.
●
To listen to TV channels through this system, use
the audio cables (white/red) to connect
AUX
IN jacks to the corresponding AUDIO OUT
jacks on the TV set.
●
Deactivate Progressive Scan through SYSTEM
MENU
. Refer to Using the Setup Menu- Using
Progressive Scan to improve image quality.
L
R
L
R
pg 001-048£ ≠ FWD573_98_Eng 2006.4.14, 2:19 PM 12