Philips FWD182, User Manual, Page: 19 / 44

English
19
Preparations
IMPORTANT!
– Make sure to complete the
preparation procedures before operating
the system.
Step 1: Inserting batteries into
the remote control
1
Open the battery compartment.
2
Place two batteries (Type R06 or AA) in the
compartment with the correct polarity as
indicated by “+” and “–” symbols.
3
Close the cover.
Using the remote control to operate the
system
1
Point the remote control
directly
at the remote sensor (IR) on
the
front panel.
2
Select the source you wish to
control by pressing one of the
source select buttons on the
remote control (for example
TAPE, TUNER).
3
Then select the desired function (for example
2;
,
O
or
P
).
CAUTION!
– Remove batteries if they are
exhausted or will not be used for a long
time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.
Step 2: Setting the TV set
IMPORTANT!
– Make sure you have completed all the
necessary connections.
1
Press DISC on the front panel (or press DISC
on the remote control).
2
Turn on the TV set and set to the correct Video-
In channel. You should see the blue Philips DVD
background screen on the TV set.
➜
You may go to channel 1 on your TV set, then
press the channel down button repeatedly until
you see the Video In channel.
➜
Or, you can use the TV remote control to
select different video modes.
➜
Or, set TV to channel 3 or 4 if you are using
an RF modulator.
Selecting the color system that matches
your TV set
This DVD Mini Hi-Fi System is compatible with
both NTSC and PAL. For the playback of a DVD
disc on this DVD Mini Hi-Fi System, the color
systems of the DVD, TV set and DVD Mini Hi-Fi
System should match.
PBC
TV SHAPE
TV SYSTEM
PROGRESSIVE
SCR SAVER
SET TO NTSC
AUTO
NTSC
PAL
1
4
23
pg 001-044£ ≠ FWD182_98_Eng 2006.3.14, 1:57 PM 19