2-2
2-2
Dismantling of the ETF Tape Module
1) Remove 6 screws G as indicated to loosen the ETF Tape
Module (pos 1104).
Dismantling of the Rear Portion
Dismantling of the Front Display Board and Front Control Board
1) Remove 1 screw C as indicated to loosen the VCD GND
Isolator Board (pos V1109).
2) Remove 1 screw C1 as indicated to loosen the Headphone
Board (pos 1101-B).
3) Remove 5 screws D as indicated to loosen the Front
Display Board (pos 1101-A).
4) Remove 9 screws E as indicated to loosen the Front
Control Board (pos 1107-A).
5) Remove 1 screw F as indicated to loosen the IR-Eye
Board (pos 1107-D).
6) Remove 3 screws N as indicated to loosen the VU Meter
Board (pos 1107-C).
1) The Knob Volume Gloss Black (pos 117) can be remove
by inserting a strong string into the slot and pull it out in
the direction as indicated. See picture 1.
2) The Knob Jog Rotary (pos 140) can be remove by
inserting a strong string into the slot and pull it out in the
direction as indicated. See picture 2.
Picture 1
Picture 2
Repair Hints
1) Remove 2 screws J and uncatch M1 as indicated to
loosen the AF Board (pos 1102-A).
2) Remove 1 screw R as indicated to loosen the Video Out
Cinch Board (pos V1102-B).
3) Remove 3 screws K and uncatch M2 as indicated to
loosen the Tuner Board (pos 1103).
4) Remove 4 screws L as indicated to loosen the Panel
Rear (pos 256).
Remove AF Board
Remove VU Meter Board
Remove VCD GND Isolator Board, Headphone Board
and Front Display Board
Remove Front Control Board and IR-Eye Board