Philips FW-P75, User Manual

Page: 19 / 31

19
3139 116 19561
English
– You can cancel manual programming by
pressing
Ç
(on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press
4
or
3
to select the desired
preset number.
™ The preset number, radio frequency,
and waveband appear on the display.
TUNER
Receiving RDS Radio Station
Ç
(for model FW-P78 only)
RDS (Radio Data System) is a broadcasting
service that allows FM stations to send
additional information along with the
regular FM radio signal. This additional
information can contain:
• STATION NAME: The radio station
name is displayed.
• PROGRAM TYPE: The following
program types exist and can be received
by your tuner: News, Affairs, Info, Sport,
Educate, Drama, Culture, Science,
Varied, Pop M, Rock M, M.O.R. (middle
of the road music), Light M, Classics,
Other M, No type.
• RADIO TEXT (RT): text messages
appear in the display.
When you have tuned to a RDS station, the
RDS logo (
Ç ) and the radio station name
will appear on the display:
• The display normally shows the radio
station name if available.
By repeatedly pressing
RDS button you
can change the type of display
information:
™ The display shows in turn:
STATION NAME ™
PROGRAM TYPE ™ RADIO
TEXT ™ TUNED
FREQUENCY ™ STATION
NAME
...
Note:
– When you press the RDS button and the
display shows " NO RDS ", it indicates
that either the tuned station is not
transmitting RDS signal or it is a non
RDS station.
RDS Clock
Some RDS station may be transmitting a
real clock time at an interval of every
minute.
Setting the time with RDS clock
1
Press CLOCK/TIMER .
™
"
--:--
" or current time appears on
the display.
2 Press CLOCK/TIMER once more to
enter clock setting mode.
™ " 00:00 " or current time starts
flashing.
3 Press RDS .
™ The message " SEARCH RDS
TIME " will be displayed.
™ If the station does not transmit RDS
clock, "
NO RDS TIME " will be
displayed.
™ When the RDS clock is read, " RDS
TIME " will be displayed. The
current clock time is displayed for 2
seconds and will be stored
automatically.
™ If within 90 seconds, the RDS time is
not detected, "
NO RDS TIME "
will be displayed.
Note:
– Some RDS station may be transmitting a
real time clock at a minute interval. The
accuracy of the transmitted time
depends on the transmitting RDS
station.
pg 01-31/P75-P78/34-Eng 2/22/00, 7:30 PM 19