3139 116 19774
17
English
OPERATING THE SYSTEM
Personal Setting
You can adjust the personal setting to
your desired level with the JOG control.
1
Press and hold
PERSONAL
for
about
five seconds
to switch on the
personal setting mode.
™
"
SELECT PRESET NUMBER
" will
be displayed.
2
Adjust the
JOG
to select the desired
preset number for personal setting
and press
á
to confirm the
selection.
™
"
ADAPT LOW FREQ LEVEL
" will
be displayed.
3
Adjust the
JOG
to select the desired
Spectrum Analyzer band level for
low frequency.
™
The level will increase or decrease
between
+
3 and
-
3.
4
Press
á
to confirm the selection.
™
"
ADAPT MID FREQ LEVEL
" will
be displayed, followed by "
ADAPT
HIGH FREQ LEVEL
".
•
Repeat
step 3 - 4
to select the
desired middle and high frequencies
of the Spectrum Analyzer band levels.
5
You can edit the name for the
personal setting.
™
The first character of the setting
name will be flashing.
6
Adjust the
JOG
to select the desired
letter, number or symbol.
™
"
A
to
Z
", "
0
to
9
" or "
*
,
-
,
+
, \, /, _".
7
Press
á
to confirm the selection.
™
The next character for editing will
be flashing.
• Repeat
steps 6
-
7
to store up to 10
characters.
8
To store the setting, press
PERSONAL
again.
• Before storing the setting, you
can press
à
to retrace the
steps.
• To exit without storing the
setting, press
Ç
.
Notes:
– During personal setting, if no button is
pressed within 90 seconds, the system
will exit personal setting mode
automatically.
– It is not possible to adjust the DBB
level during personal setting, "
USE
JOG
" will be displayed.
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to adjust
the system to suit your type of music.
1
Press to select the
DSC
feature.
2
Adjust the
JOG
to select the
desired DSC setting : OPTIMAL,
CLASSIC, TECHNO, VOCAL, ROCK
or JAZZ.
™
The selected digital sound is
encircled.
™
"
OPTIMAL
,
CLASSIC
,
TECHNO
,
VOCAL
,
ROCK
or
JAZZ
" will be
displayed.
Note:
– For a neutral setting, select CLASSIC.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to
enhance the bass response.
1
Press to select the
DBB
feature.
2
Adjust the
JOG
to select the
desired DBB level : BEAT, PUNCH or
BLAST.
™
The DBB LED will be lit.
™
“
BEAT
”, “
PUNCH
” or “
BLAST
” will
be displayed.
To switch off DBB
1
Press
DBB
briefly.
2
Adjust the
JOG
until “
DBB OFF
” is
displayed.
Note:
– Some CDs might be recorded in high
modulation, which causes a distortion
at high volume. If this occurs, switch off
DBB or reduce the volume.
Automatic DSC-DBB / VEC-DBB
selection
The best DBB setting is generated
automatically for each DSC or VEC
selection. You can manually select the DBB
setting that best suits your listening
environment.
pg 01-43/D5/37-Eng
7/13/00, 11:50 AM
17
