18
English
3140 115 xxxxx
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
“Loading discs”).
2
Press
PROGRAM
to start programming.
➜
PROG
starts flashing.
3
Press
CD
or
DISC 1
/
2
/
3
to select a disc.
4
Press
í
or
ë
repeatedly to select the desired
track.
5
Press
PROGRAM
to store the track.
●
Repeat
steps 3–5
to store other discs and
tracks.
6
To end programming, press
Ç
once
.
➜
PROG
stays and the programme mode
remains active.
➜
The total number of tracks programmed and
the total playing time are displayed.
7
To start programme play, press
ÉÅ
.
➜
"
PLAY PROGRAM
" is displayed.
Notes:
– If the total playing time is more than "
99:59
"
or if one of the programmed tracks has a number
greater than 30, then "
--:--
" is displayed
instead of the total playing time.
– If you attempt to programme more than 40
tracks, "
FULL
" is displayed.
– If you press any of the CD DIRECT 1/2/3
buttons on the remote control, the system will play
the selected disc or track, and the stored
programme will be ignored temporarily. The
PROG
symbol also will disappear temporarily from the
display. It will reappear when playback of the
selected disc ends.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
CD Operation
To review the programme
●
Stop playback and press
í
or
ë
repeatedly.
●
To exit review mode, press
Ç
.
Erasing the programme
●
Press
Ç
once
when playback is stopped or
twice
during playback.
➜
PROG
disappears and "
PROGRAM CLEARED
"
is displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to “Tape
Operation/Recording”.
