background image

2

3139 116 17941

English

Français

Español

Deutsch

Nederlands

Italiano

Svenska

Dansk

Suomi

Português

∂ÏÏËÓÈο

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this
type of plug proceed as follows:

1

Remove fuse cover and fuse.

2

Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.

3

Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug
without a fuse is used, the fuse at the distribution board should not be greater
than 5 Amp.

Note:

 The severed plug must be disposed of to avoid a possible shock hazard

should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral
(N), brown = live (L).
As these colours may not correspond with the colour markings identifying the
terminals in your plug, proceed as follows:
• Connect the blue wire to the terminal marked N or coloured black.
• Connect the brown wire to the terminal marked L or coloured red.
• Do not connect either wire to the earth terminal in the plug, marked E (or 

e

) or

coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over
the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956
and The Performer’s Protection Acts 1958 to 1972.

Norge

Typeskilt finnes på apparatens underside.

Observer:

 Nettbryteren er sekundert innkoplet.

Den innebygde netdelen er derfor ikke frakoplet
nettet så lenge apparatet er tilsluttet
nettkontakten.

For å redusere faren for brann eller elektrisk
støt, skal apparatet ikke utsettes for regn eller
fuktighet.

Italia

Dichiarazione di conformita’

Si dichiara che l’apparecchio FW358C Philips
risponde alle prescrizioni dell’art. 2, comma 1
del D.M. 28 Agosto 1995
n. 548.

Fatto a Eindhoven , il 27/2/1998

Philips Sound & Vision

Philips, Glaslaan 2, SFF 10

5616 JB Eindhoven, The Netherlands.

Untitled-26

6/15/00, 4:51 PM

2

Summary of Contents for FW 358C

























Reviews: