16
Use of the menus
Display message
Switch the TV to standby.
The message appears on the screen when the TV is switched on again.
If you selected
Once
, the message will disappear from the screen after
45 seconds.
If you selected
Continuous
, the message will appear on the screen until the
Run
menu item in the Message menu is switched to
No
.
The message does NOT appear when Continuous subtitles have been
switched On. See p. 11.
Timers
With the Timers menu you can make your TV automatically switch to a
specific programme number (greater than 1) from standby or switch over to a
different programme number at a specific time.
Actual time
If you have installed a TV channel which also broadcasts teletext on
programme number 1 or under the lowest favourite programme number
greater than 1, the time is downloaded from that TV channel.
If this is not the case you have to set the time manually with the digit keys.
The time, (entered manually) is updated every minute and remains until the
TV is switched off with the power key
A
.
Programme
Enter with the digit keys the programme number of the TV channel you want
your TV to switch over to.
Start time
Enter with the digit keys the start time of the selected TV programme
number you want your TV to switch over to.
Cancel timer
Select
Cancel timer
and press OK to reset the Start time to --:--
TIMERS
Actual Time
Programme
Start Time
Cancel Timer
Should your remote be lost or broken you can still change some of the basic
picture and sound settings with the keys in front of the receiver box.
Press the
LOCAL MENU
key behind the door at the front of the receiver
repeatedly to select
Volume
,
Brightness
,
Colour
,
Contrast, Treble
or
Bass
.
Press the
VOLUME
- or + key to adjust the chosen selection.
The
PROGRAM
- and + keys enable you to select the TV channels.
Note: If the message
Child Lock On
appears, the child lock must be switched off (with
a remote control) before you can use the
PROGRAM
- and + or the
VOLUME
- or +
keys on the receiver. See p. 15.
The selected adjustment automatically switches off when after 10 sec. no action has
been executed.
Keys in front of the receiver box
LOCAL
MENU
VOLUME
PROGRAM